Riptide

Anyone pay to have a line lock installed? How much was it? I've seen the TB writeup and honestly it looks a little over my head. So I'm curious what a mechanic might charge to do the work.

blueherd02gt

Probably 1 to 2 hrs labor..~$150 to ~$200

sactown

It was actually very simple, get a neighbor to give you a hand and just take your time, the worst parts are mounting the solenoid and finding a good location of the no/off switch, but even that is easy with some help.

It would probably take about 2 hours for a shop.

sactown

I thought you might enjoy this, its the line locks in action.

http://www.youtube.com/watch?v=zZlbZoC-pXg

VistaGT

Cool vid!

DarkFireGT

Here's my write-up for the PMP kit. Honestly, it's very straight-forward. It's not nearly as hard as it may seem. I'm not all that mechanically inclined. It takes some time, for sure. But there's nothing hard about it.

http://www.stangnet.com/Tech-Article...ll-080225.html

Stkjock

i'd say 2 hours ish is about right