B&M shifter
05-22-2008, 04:31 PM
#1
2nd Gear Member
Thread Starter
Join Date: Mar 2007
Location: CA
Posts: 234
B&M shifter
I know the B&M shifter is not a popular choice but I was wondering if anyone has pictures of it in ther Mustang. I believe you can use the stock know with it. Can anyone verify this?
05-23-2008, 09:52 AM
#2
1st Gear Member
Join Date: Mar 2006
Location: Texas
Posts: 126
RE: B&M shifter
I had the B&M installed in my car for about three months. It does take the stock **** as the threads are the same as stock.
I was not happy with this shifter. (It does not flex well with the transmission due to the different design that B&M uses so this lead to extra noise coming from the shifter. Also the shifter would get harder to shift the longer I drove the car - 2 hour drive vs 15 min.)
I finally pulled the trigger and bought the MGW shifter last month. The MGW is well worth the money. The shifting feel is fantastic now and the shifter is very quiet. The installation was very easy as the MGW comes with an installation video.
I was not happy with this shifter. (It does not flex well with the transmission due to the different design that B&M uses so this lead to extra noise coming from the shifter. Also the shifter would get harder to shift the longer I drove the car - 2 hour drive vs 15 min.)
I finally pulled the trigger and bought the MGW shifter last month. The MGW is well worth the money. The shifting feel is fantastic now and the shifter is very quiet. The installation was very easy as the MGW comes with an installation video.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM