Correction 12.8 105
05-01-2005, 08:41 PM
#2
Former Sponsor
Join Date: Apr 2005
Location: IN
Posts: 495
RE: Correction 12.8 105
Thanks for post.
Today, Sunday, we went 12.68@107.20 with the addition of the Steeda pulleys and a ripping 1.735 short time. So to date the engine mods on our car are the C&L intake, pulleys, Mac axleback, and our tune. For traction we use ET street tires and Steeda trailing arms to prevent the bad wheel hop. Again the only part removed was the spare tire. We had a really cool day today at about 50 degrees.
I think the next step will be a set of 4.30 gears or long tubes. I have not yet decided which to test first. Thanks for the post and if you have any questions feel free to give me a call at the shop 574.834.7455. We stock all these parts except the tires.
Today, Sunday, we went 12.68@107.20 with the addition of the Steeda pulleys and a ripping 1.735 short time. So to date the engine mods on our car are the C&L intake, pulleys, Mac axleback, and our tune. For traction we use ET street tires and Steeda trailing arms to prevent the bad wheel hop. Again the only part removed was the spare tire. We had a really cool day today at about 50 degrees.
I think the next step will be a set of 4.30 gears or long tubes. I have not yet decided which to test first. Thanks for the post and if you have any questions feel free to give me a call at the shop 574.834.7455. We stock all these parts except the tires.
Thread
Thread Starter
Forum
Replies
Last Post
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM