Fastest S197 TS in the country! 9.50 141.95
#1
Fastest S197 TS in the country! 9.50 141.95
I ripped this from another site. This was posted by psfracer who is a member here as well. He shot a great video as well. [/align]This is Adam from ST motorsports, he currently has a stock bore and stroke 281 with the KB 2.8H.[/align][/align][/align]Here are the timeslips. I am working on a video now.....
Couldn't turn up the car all the way because the car started spinning about 30 feet out - but as it sits 142 mph should be good for high 9.3X's.
As a side note, Adam tried switching from the M/T ET Street Radial to the bias ply ET Street-and the Street Radial worked much better. Take that for what its worth.
A 6.05 @ 114 in the 1/8th is pretty damn good I think.
Looks like there is a new #1 on the list.....[/align][/align]http://videos.streetfire.net/video/ST-Motorsports-Kenne-Bell_173873.htm
http://videos.streetfire.net/video/S...ell_173873.htm
[/align]
Attached Thumbnails
[/align] [/align]
__________________
2005 GT Auto Whipple @ 16psi 577 rwhp 519 rwtq
Best 1/8th mile: 6.740 @ 101.56 mph with a 1.431 60'
Best 1/4 mile: 10.672 @ 128.42 mph with a 1.480 60'
ST Motorsports, Larry's Transmission, M&H [/align]
Couldn't turn up the car all the way because the car started spinning about 30 feet out - but as it sits 142 mph should be good for high 9.3X's.
As a side note, Adam tried switching from the M/T ET Street Radial to the bias ply ET Street-and the Street Radial worked much better. Take that for what its worth.
A 6.05 @ 114 in the 1/8th is pretty damn good I think.
Looks like there is a new #1 on the list.....[/align][/align]http://videos.streetfire.net/video/ST-Motorsports-Kenne-Bell_173873.htm
http://videos.streetfire.net/video/S...ell_173873.htm
[/align]
Attached Thumbnails
[/align] [/align]
__________________
2005 GT Auto Whipple @ 16psi 577 rwhp 519 rwtq
Best 1/8th mile: 6.740 @ 101.56 mph with a 1.431 60'
Best 1/4 mile: 10.672 @ 128.42 mph with a 1.480 60'
ST Motorsports, Larry's Transmission, M&H [/align]
#2
RE: Fastest S197 TS in the country! 9.50 141.95
If you look in the new issue of MM&FF, looks like there is a faster S197. I think it was 8.89 by Justin at JPC. I dont have the issue in front of me, but I think that makes Adam the 2nd fastest.
#3
RE: Fastest S197 TS in the country! 9.50 141.95
ORIGINAL: xROBxCOREx
If you look in the new issue of MM&FF, looks like there is a faster S197. I think it was 8.89 by Justin at JPC. I dont have the issue in front of me, but I think that makes Adam the 2nd fastest.
If you look in the new issue of MM&FF, looks like there is a faster S197. I think it was 8.89 by Justin at JPC. I dont have the issue in front of me, but I think that makes Adam the 2nd fastest.
#4
RE: Fastest S197 TS in the country! 9.50 141.95
Yeah, it was 8.89 at 150mph in the 1/4. It also did 5.64 at 122 in the 1/8th mile. Heres a video:
http://www.youtube.com/watch?v=5mt1mXiVKvU
http://www.youtube.com/watch?v=5mt1mXiVKvU
#8
RE: Fastest S197 TS in the country! 9.50 141.95
He builds his motorsfrom scratchand will generally use the same general combo. He has another Mustang with a 3.4 whipple on it with diamond pistons, billet rods (mine are scat forged), kellog crank and after market heads/cams. He basically built me the same short block with different rods. He is a good guy and builds some very strong motors that also last.
I think he his trying to see what he can get out of the 3 valve in a stock displacement.
I think he his trying to see what he can get out of the 3 valve in a stock displacement.
#9
RE: Fastest S197 TS in the country! 9.50 141.95
The mag is in my car, but I beleive it is an aluminator block with avortech and N2O. (I could be wrong on the SC, but will check it out next time I pick up the article).