Whipple SC'd Stang + FRPP Hot Rod Cams- install writeup sticky at top!
08-24-2008, 09:21 AM
#46
2nd Gear Member
Join Date: Oct 2007
Location: Indiana
Posts: 291
well i installed these last night and can't
wait to fire it up to see if it'll even run.....
i took lots of pics (as always), so if there
is any reasonable demand for a write-up,
i'll do one.
should have it all put back together and
started for the first time, on sunday.
did a before dyno run as a baseline and if
this hog runs well enough to drive it back,
i'll get an after run as well...
special thanks to jmose77, who answered all
of my technical questions.
hey vocoat and mustanglouie.......a dark horse
suddenly appears in the race......
EDIT: for those that don't want to read until pg 3 about the write up Hammeron did on the install of the FRPP Hot Rod Cams see sticky at top of 4.6L section- mygt500
wait to fire it up to see if it'll even run.....
i took lots of pics (as always), so if there
is any reasonable demand for a write-up,
i'll do one.
should have it all put back together and
started for the first time, on sunday.
did a before dyno run as a baseline and if
this hog runs well enough to drive it back,
i'll get an after run as well...
special thanks to jmose77, who answered all
of my technical questions.
hey vocoat and mustanglouie.......a dark horse
suddenly appears in the race......
EDIT: for those that don't want to read until pg 3 about the write up Hammeron did on the install of the FRPP Hot Rod Cams see sticky at top of 4.6L section- mygt500
Thanks for throwing a dog a bone. LOL Glad I could help. Nice job on the install. I am looking forward to seeing these cams paired with your super charger and how they perform.
Thread
Thread Starter
Forum
Replies
Last Post
xbmx89
Texas Regional Chapter
1
11-10-2015 10:43 PM
