Hot Rod Cam Installation Guide
09-06-2008, 11:16 AM
3rd Gear Member
Join Date: Nov 2006
Location: United Socialist States of America, Comrade.
Posts: 742
excelent writeup...
can i still use my small shot of nitrous with this cams?
09-06-2008, 11:33 AM
6th Gear Member
Thread Starter
Join Date: May 2006
Location: Nicely done
Posts: 11,881
thanks mx07gt
i'll let one of the nitrous gurus, answer that
09-13-2008, 01:16 PM
5th Gear Member
Join Date: Aug 2008
Location: Valparaiso, IN
Posts: 2,344
Nice write up for the cam install, I'm looking at throwing the same cams under the hood of my car, It will give me something to refer to.
09-13-2008, 01:16 PM
5th Gear Member
Join Date: Aug 2008
Location: Valparaiso, IN
Posts: 2,344
How long did the install take?
09-13-2008, 01:40 PM
6th Gear Member
Thread Starter
Join Date: May 2006
Location: Nicely done
Posts: 11,881
GrnBullitt08, these cams are going to be
a nice compliment to your car.
i didn't do it all in one session, because
i had to wait for my cams (this allowed me
to get everything prepped and ready)....if i
were to do it all over again, it would probably take
me at least 5-6 hours
good luck with the project and let us know how
you like the new hot rod sound
09-13-2008, 01:56 PM
2nd Gear Member
Join Date: Nov 2007
Location: Gainesville GA
Posts: 329
took me like 8-10 hours. I had never done anything like this before and went off of hammerons write up. Good luck!
10-12-2008, 07:55 AM
2nd Gear Member
Join Date: Jul 2005
Location: cincinnati
Posts: 215
Thanks for the writeup hammeron..it was very useful in my cam install. You made it look so easy I had to try it myself
10-12-2008, 10:03 AM
6th Gear Member
Thread Starter
Join Date: May 2006
Location: Nicely done
Posts: 11,881
hey that's great steve and i'm glad
you got that small issue resolved....
post a vid soon if you can
Last edited by hammeron; 10-12-2008 at 10:20 AM.
10-26-2008, 11:44 AM
4th Gear Member
Join Date: Oct 2007
Location: Kaiserslautern, Germany
Posts: 1,418
How much does ford charge for the special tools and bolts... ??
10-26-2008, 11:54 AM
6th Gear Member
Thread Starter
Join Date: May 2006
Location: Nicely done
Posts: 11,881
Johnboy,
303-1175 $90
303-1039 $147
cam sprocket bolts are $ 13.35 ea.
