Dyno sheet gains for hot rod cams
 

As promised I have my dyno sheets for after cams installation. However, I must admit that I also eliminated my Cats between the Dyno runs. Gains were there in torque and HP throughout the RPM band. The picture or two of the two pulls superimposed tell the real story. Car pulls like a freight train and sounds great.
Max gains were 31 HP and 12 FTLB torque per the sheets. Anyway on to the pics of the sheets and sound clips.

Before Cams:
http://i23.photobucket.com/albums/b3...c/DSC02119.jpg

After Cams:
http://i23.photobucket.com/albums/b3...c/DSC02143.jpg

Before and After Together:
http://i23.photobucket.com/albums/b3...c/DSC02145.jpg
http://i23.photobucket.com/albums/b3...c/DSC02146.jpg

Sound clip Before Cams:
http://s23.photobucket.com/albums/b3...t=MOV02097.flv

Sound clip After Cams:
http://s23.photobucket.com/albums/b3...t=MOV02137.flv

#'s look good! Were they worth the price to you? -Jon

Thanks. Oh yeah! It's a hoot to drive and does turn some heads. But then I am just a fool for parts anyway. And I loved being able to install them myself.

great dyno #'s

Fool4Parts, that is great

the sound is priceless, see ya at
the next crew meeting

Thanks!

Thanks! To me it sounds like a race car! I just love it.

Springs?
 

I have heard some videos online of these cams, or what I believe them to be.. Did you have to do the springs? Can you post a video of your idle and revs?

I am looking to do cams, I realize the cost to gains is not great, but damn I love the sound of a high lope :-)

Thanks,
Scott

congrats and wicked numbers. Nice to see soem N/A guys shutting up the peeps who said over 350 was not achievable. These are my next mod I hope to be in the range you are and run my 75 shot and Im a happy camper...

got any vids?

These are the FRPP #M6550-3V cams, change of springs is not required. I only have video of the car at idle.

Before Cams:
http://s23.photobucket.com/albums/b3...t=MOV02097.flv

After Cams:
http://s23.photobucket.com/albums/b3...t=MOV02137.flv