Dyno sheet gains for hot rod cams
#1
Dyno sheet gains for hot rod cams
As promised I have my dyno sheets for after cams installation. However, I must admit that I also eliminated my Cats between the Dyno runs. Gains were there in torque and HP throughout the RPM band. The picture or two of the two pulls superimposed tell the real story. Car pulls like a freight train and sounds great.
Max gains were 31 HP and 12 FTLB torque per the sheets. Anyway on to the pics of the sheets and sound clips.
Before Cams:
http://i23.photobucket.com/albums/b3...c/DSC02119.jpg
After Cams:
http://i23.photobucket.com/albums/b3...c/DSC02143.jpg
Before and After Together:
http://i23.photobucket.com/albums/b3...c/DSC02145.jpg
http://i23.photobucket.com/albums/b3...c/DSC02146.jpg
Sound clip Before Cams:
http://s23.photobucket.com/albums/b3...t=MOV02097.flv
Sound clip After Cams:
http://s23.photobucket.com/albums/b3...t=MOV02137.flv
Max gains were 31 HP and 12 FTLB torque per the sheets. Anyway on to the pics of the sheets and sound clips.
Before Cams:
http://i23.photobucket.com/albums/b3...c/DSC02119.jpg
After Cams:
http://i23.photobucket.com/albums/b3...c/DSC02143.jpg
Before and After Together:
http://i23.photobucket.com/albums/b3...c/DSC02145.jpg
http://i23.photobucket.com/albums/b3...c/DSC02146.jpg
Sound clip Before Cams:
http://s23.photobucket.com/albums/b3...t=MOV02097.flv
Sound clip After Cams:
http://s23.photobucket.com/albums/b3...t=MOV02137.flv
Last edited by Fool4Parts; 08-30-2008 at 02:11 PM. Reason: adding sound clips
#3
#8
Springs?
I have heard some videos online of these cams, or what I believe them to be.. Did you have to do the springs? Can you post a video of your idle and revs?
I am looking to do cams, I realize the cost to gains is not great, but damn I love the sound of a high lope :-)
Thanks,
Scott
I am looking to do cams, I realize the cost to gains is not great, but damn I love the sound of a high lope :-)
Thanks,
Scott
#9
congrats and wicked numbers. Nice to see soem N/A guys shutting up the peeps who said over 350 was not achievable. These are my next mod I hope to be in the range you are and run my 75 shot and Im a happy camper...
got any vids?
got any vids?
Last edited by TOMBSTANG; 08-30-2008 at 12:36 AM.
#10
I have heard some videos online of these cams, or what I believe them to be.. Did you have to do the springs? Can you post a video of your idle and revs?
I am looking to do cams, I realize the cost to gains is not great, but damn I love the sound of a high lope :-)
Thanks,
Scott
I am looking to do cams, I realize the cost to gains is not great, but damn I love the sound of a high lope :-)
Thanks,
Scott
Before Cams:
http://s23.photobucket.com/albums/b3...t=MOV02097.flv
After Cams:
http://s23.photobucket.com/albums/b3...t=MOV02137.flv