When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Location: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Posts: 16,182
Originally Posted by KTownGT
If they axle-backs aren't lining up right all you have to do is mess with the mid pipes a little bit.
+1
No bending hangers or anything like that required. It's all in the write-up in the sticky for the Stinger Install but the tip on centering and adjusting the pipes in the bumper opening applies to all axlebacks. After mine didn't sit right it took all of about 10 minutes to adjust by tweaking the midpipe and axleback clamps in unison.