CMDP - no economy version?
08-05-2009, 11:51 AM
#1
6th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Montaner
Posts: 6,193
CMDP - no economy version?
Looks like Brenspeed doesn't have the $150 plates available any more. And on Steeda's site they also only have the $300 billet.
Can someone confirm that the econo version is no longer available?
Because if they are serious about $300 for these things then SCREW that.
Can someone confirm that the econo version is no longer available?
Because if they are serious about $300 for these things then SCREW that.
08-05-2009, 02:48 PM
#3
2nd Gear Member
Join Date: Nov 2008
Location: Valrico, FL
Posts: 207
Found them. $135. I know some folks have had issues w/RPM - I have ordered there with no issues though.
http://www.rpmoutlet.com/05gtkbp.htm
http://www.rpmoutlet.com/05gtkbp.htm
08-05-2009, 05:05 PM
#6
Mish-ogynist
Join Date: Nov 2007
Location: Helena, MT
Posts: 3,780
if you want some CMDPS we should just take my old factory plates and convert them... 
at $300 you might as well get a C&L intake manifold.. those are like $600 right? but might offer more performance.. if they can get it going right..
at $300 you might as well get a C&L intake manifold.. those are like $600 right? but might offer more performance.. if they can get it going right..
08-05-2009, 07:05 PM
#7
2nd Gear Member
Join Date: Nov 2008
Location: Las Vegas
Posts: 290
Did you search AmericanMuscle, they sponsor the site and give a pretty solid discount to members.
http://www.americanmuscle.com/steeda...es-2005gt.html
http://www.americanmuscle.com/steeda...es-2005gt.html
12-02-2009, 10:21 PM
#9
2nd Gear Member
Join Date: Nov 2008
Location: Las Vegas
Posts: 290
Apologies for reviving an old thread kids, but I was doing some X-mas shopping (for myself, I gotta make sure I get at least one gift I llike, right?) I decided its time I throw some Delete Plates on, well much to my chagrin, I can't find the econo-CMDP anywhere. RPMoutlet still has them, but I've heard so many horror stories, plus I'd still have to buy a tune elsewhere.
RipTide, what'd you end up doing? Or really, anyone: got any suggestions? This economy has us state workers too broke to do anything big. I'm fiending for a mod, and if I don't get a fix soon, well, who knows....
RipTide, what'd you end up doing? Or really, anyone: got any suggestions? This economy has us state workers too broke to do anything big. I'm fiending for a mod, and if I don't get a fix soon, well, who knows....
Last edited by DLZ314; 12-02-2009 at 10:23 PM. Reason: ....
12-02-2009, 11:28 PM
#10
2nd Gear Member
Join Date: Aug 2009
Location: Virginia
Posts: 265
The economy plates are discontinued when all the current stock is depleted according to a Steeda guy I talked to a few weeks ago.
I made my own from a stock ford set a few weeks ago but haven't had a chance to install them yet. The DIY set cost me about $30 to do including the used stock plates and other materials plus a couple hours of work.
I made my own from a stock ford set a few weeks ago but haven't had a chance to install them yet. The DIY set cost me about $30 to do including the used stock plates and other materials plus a couple hours of work.
