LED sequential problem
07-23-2013, 01:57 AM
#1
Thread Starter
Join Date: Jun 2012
Location: Amsterdam
Posts: 28
LED sequential problem
2006 GT
Hi,
I've installed the LED sequential tail light kit from AM. They flash really nice but if i turn on the lights, not all of them remain lit. Only the outer 4 will illuminate (black socket)
When i replace the red LED in the grey socket for a similar white LED it remains lit with the lights on bit does not flash.
Is this supposed to happen or not? I am very confused and i need a solution.
Hi,
I've installed the LED sequential tail light kit from AM. They flash really nice but if i turn on the lights, not all of them remain lit. Only the outer 4 will illuminate (black socket)
When i replace the red LED in the grey socket for a similar white LED it remains lit with the lights on bit does not flash.
Is this supposed to happen or not? I am very confused and i need a solution.
Last edited by Rams; 07-23-2013 at 02:08 AM.
07-31-2013, 05:23 AM
#3
Thread Starter
Join Date: Jun 2012
Location: Amsterdam
Posts: 28
It has been solved. American Muscle says this is normal. I was very disappointed in AM.
I had some help from another dutch mustang owner. He cut the blue wire from the inner socket and added it on to the brown wire from the middle socket. I'll try to post a picture when i can.
All 6 of them remain lit when the lights are switched on.
I had some help from another dutch mustang owner. He cut the blue wire from the inner socket and added it on to the brown wire from the middle socket. I'll try to post a picture when i can.
All 6 of them remain lit when the lights are switched on.
Last edited by Rams; 07-31-2013 at 05:27 AM.
Thread
Thread Starter
Forum
Replies
Last Post
andrew1969
Classic Mustang General Discussion
16
01-08-2016 02:48 PM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM
