Suggestions needed
#1
Suggestions needed
Not anything major but I'm looking to change my "5.0" to a black one and not sure if their is a difference between the ones I've seen. So who makes a quality one that also includes the tape to put them on. Also, looking for a good white shifter handle. Any suggestions or feedback would be helpful. Thanks!
#2
Shifter handles can be found at www.cjponyparts.com in about any color you want. I got a custom one that's white with blue stripes.
#4
Not anything major but I'm looking to change my "5.0" to a black one and not sure if their is a difference between the ones I've seen. So who makes a quality one that also includes the tape to put them on. Also, looking for a good white shifter handle. Any suggestions or feedback would be helpful. Thanks!
Just pull them off and paint them, then retape and put back on
#6
Very cool. Think I'll place my order tomorrow along with a redline alcantera shift boot. Thanks for the feedback.
#7
Plasti-Dip works well for those emblems since you are painting over plastic with an electro-static chrome finish.
Or you can hit it with an 800 grit, then a 1000 grit, then an adhesive promoter prior to painting.
Frankly, the Plasti-Dip is easier and cheaper and if you don't like it or muck it up, you can peel it off and reapply it
I took the longer method with mine...
You can also put the rest of the paint to good use and do your coil covers
Then add these...
cheap DYI mods are the best!! =)
Or you can hit it with an 800 grit, then a 1000 grit, then an adhesive promoter prior to painting.
Frankly, the Plasti-Dip is easier and cheaper and if you don't like it or muck it up, you can peel it off and reapply it
I took the longer method with mine...
You can also put the rest of the paint to good use and do your coil covers
Then add these...
cheap DYI mods are the best!! =)
Last edited by steel pony; 07-25-2013 at 07:17 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Calizic
4.6L (1996-2004 Modular) Mustang
5
08-28-2015 01:46 PM