thatmachguy

i already have a k and n intake system magnaflow exhaust its lowered on h an r springs. want more go. but dont have that deep of pockets right now. whats some things you guys would recommennd thanks in advanced. i was gonna pm someone about the the 60mm twin throttle body. but i cant pm yet. pretty gay

Fstanggt96

Lol, I already sold it, they dont do much, put your money into some 3.73's or 4.10s next. All this bolt on **** is useless.

thatmachguy

which would you prefer 4.10 or 3.73 i want better accelration, my friend has 4.10s in his mach runs good but it makes a whine when he is deaccelerating.

cwf340

go with 4.30 gears, FRPP brand are less likely to whine.

I G Joe

4.30's are gonna be killer on the street, all that up and down shifting. i saw, intake spacer since you have the supporting mods except a T/B yet. while you are gonna do the spacer, polish the inside of the intake then go get a tune.

thatmachguy

spacer from who any links, and how do you polish the inside of the intake

Fstanggt96

I want 4.10s really bad, 4.30 would be too much. Again, TB does next to nothing so I would forget that.

thatmachguy

i have never heard of 4.30s lol i would go 4.1 i just really dont want that whine he said its the gears grinding or something

thatmachguy

yesdabout to move so i will have to wait a week or so before i can get it. so 4.10s and a spacer. now that i think about it 4.10s and a short throw maybe the other way around

I G Joe

Polishing the intake should only take a couple of steps with sand paper, i have not done it myself yet, so i am no help currently. BUT i do have a link

https://www.paulshp.com/cgi-bin/webs...6&type=&frame=