Well, here is the change.
First I would like to thank Jeff, Mike and Jason for all the help today. Still have a lot of work left, but if it wasn't for them I wouldn't even have got this far. As we go through the pics and parts they should look really familiar since they are coming off the "Original Sleeper".
Before we started
Koni Yellows, Hotchkis Springs and Ground Control C/C Plates
Stainless Works LT's with High Flow Cats and X-Pipe
Stock axle with 3.31
Took the axle of Black (3.73's) and put it on Blue. Koni Yellows, Hotchkis Springs, Whiteline LCA, Whiteline Panhard, Whiteline Chassis support, Whiteline LCA relo brackets, METCO UCA
Pulled the stock intake from blue to put on black
MGW from Black now in Blue
Finishing the install of the METCO UCA
MegnaFlow Black Quad Tip Axleback with GT500 Diffuser
Textured Black ForgeStar 19x9 and 19x11
Forgot to take a pic of the BMR K-member with everything on it as well as the one piece DS. It is frick'n awesome even though it was a PITA. Really cleans up the underside and tons of room.
The supercharger still needs to be installed along with the BMR Radiator support. Like I said, lots of work left, but a great start.
Oh yeah, still have to put the black car back together. LOL