Since everyone else is doing it.. JT76's 08-11 Compilation+ a look ahead
#21
#22
#24
More progress for those who are interested:
Got some solid progress done. Cold side completed (mock up block):
Went with the Tial Q bov
Now on to big progress... Finally got my engine home from the builders
goodies waiting to go in
Cam, check.
Rollmaster Timing chain on after we pulled the stock timing gear off
Melling oil pump
I never knew that the front and rear covers contribute to block rigidity, special GM tools for the proper installation and alignment!
movin' right along
Porcupine
Zed R-1 Headgaskets, LS7 lifters and LS2 lifter trays also installed
Oh yeaaaa
Got some solid progress done. Cold side completed (mock up block):
Went with the Tial Q bov
Now on to big progress... Finally got my engine home from the builders
goodies waiting to go in
Cam, check.
Rollmaster Timing chain on after we pulled the stock timing gear off
Melling oil pump
I never knew that the front and rear covers contribute to block rigidity, special GM tools for the proper installation and alignment!
movin' right along
Porcupine
Zed R-1 Headgaskets, LS7 lifters and LS2 lifter trays also installed
Oh yeaaaa
#27
Thread
Thread Starter
Forum
Replies
Last Post
Offendant
V6 (1994-2004) Mustangs
6
09-23-2015 07:21 PM