Update on blow thru conversion
03-30-2012, 05:12 PM
#1
5th Gear Member
Thread Starter
Join Date: Dec 2005
Location: NJ
Posts: 3,769
Update on blow thru conversion
Today I got my VMP 3" housing, HPX slot style MAF, and connector for existing MAF. Starting to mock everything up:
Still just have to cut the throttle body pipe appropriately, mock up my IAC line to the throttle body pipe, and relocate my boost reading line for the meth. Other than that, just need fresh powder coating on the pipes
Still just have to cut the throttle body pipe appropriately, mock up my IAC line to the throttle body pipe, and relocate my boost reading line for the meth. Other than that, just need fresh powder coating on the pipes
03-30-2012, 07:14 PM
#2
5th Gear Member
Thread Starter
Join Date: Dec 2005
Location: NJ
Posts: 3,769
Heres everything completely mocked up. Just need the bung welded for the IAC line, and re-powdercoating:
The only thing that will be different in the final product is I'll mount the MAF on the side of the piping instead of on top
The only thing that will be different in the final product is I'll mount the MAF on the side of the piping instead of on top
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM