- View Profile: allinon72

Go Back > Members
Reload this Page >

allinon72's Profile

allinon72 allinon72 is offline

2nd Gear Member

Visitor Messages

Showing Visitor Messages 1 to 8 of 8
  1. madmiller
    07-26-2011 01:13 AM
    color good not crap nice pony
  2. 09mustangt
    06-22-2011 10:49 PM
    Hey I have a 2009 mustang gt and I love your rims...only problem is they dont make them for our car in black chrome. I see you have 18x9 but what size tire do you have. I'm going to go 285 in the rear with 18x10, and what ever you have with 18x9 in the front. Please message me back as soon as possible. Do you have spacers anywhere because of any rub?

    Thanks, David
  3. donman
    06-21-2011 03:11 PM
    Hey I have a couple questions regarding the thread below.
    Do you have the Hid head lights from DDM Tuning? If so what did you get. I don't want mine to bright or off color. (None of that blue color crap) Also did you add the HID to all four lights (i.e fog lights) And one last thing I have already have the Eleanor grille and was thinking of getting the headlight splitters. Do you anymore pictures that you could send to me? Thanks...
  4. wescherry
    02-14-2011 09:59 AM

    I was reading your post about installing the 4200dvd and I was wanting to double check the iPod cable that you got for the radio. In the post it says you got the CD-IU200V but on Amazon it shows that cable as being the one with the mini-usb and not the full sized usb like the back of the radio has. The CD-IU50V has the full size usb. I'm about to buy this radio so I thought I would ask you about it. I don't actually have the radio yet so I'm double checking in case amazon's pictures are wrong. Thanks for the write up and response. It's going to help me out a lot.
  5. phaze421
    01-26-2011 04:09 PM

    I saw your post on the DDM HID kit. I purchased the same Low beam only kit I'm confused on how to install them. I've installed the same kit on my Maxima and Charger which were just direct plug-ins.

    Here's my problem, I have an 07 GT and the stock harness has 3 wires- purple, black, and white. I'm assuming these are for HI/Low/Ground. I have the Bulb's connected to the ballasts properly, however the spades don't fit into the stock harness (the slots are too small). Did you just shove them in there really hard to make them fit or did you splice the wires together?
  6. allinon72
    01-13-2011 09:40 AM
  7. 06gtdamon
    01-13-2011 08:55 AM
    hey which part of indiana are you from?
  8. alien56
    09-05-2010 07:50 PM

    I saw your post on the 4200DVD install on your car and it was really nice. I have two questions for you. How do properly attach the wire to the automotive relay and how do you properly attach wire to a voltage regulator? I'm pretty new to this so I just wanted to be sure on how to do it. I saw the video for the bypass and it looked as though he just slid the wire on the connectors, but I'm not sure what was on the end of the wire to hold it in place.


About Me

  • Personal Information
  • Vehicle Information
    Year, Make, Model
    2005 Mustang GT
  • Signature
    Black Chrome Saleen rims | CDC Classic | GT500 spoiler | Vogtland springs | Koni STR.T | BMR panhard bar | BMR LCAs | J&M camber plates | K&N CAI | Pypes Violators | Baer Eradispeed+2


Total Posts
Visitor Messages
General Information
  • Last Activity: 04-21-2013 08:36 AM
  • Join Date: 06-15-2010
  • Referrals: 0
Featured Sponsors
Vendor Directory