Help w/4.10's install in WI
 

Could anyone give me a hand with the install of a set of 4.10's? I'm in Madison, WI and have access to a couple of different lifts in the area. I'd gladly compensate you for your time, gain a little knowledge and make a new friend(s) at the same time! Please let me know and if I can find some help, I'll have my brother order the set from the Ford dealership he works at!

Thanks a lot!


Jeff

Hey if you can get it done, let me know how much it costs you and if it has no problems because prices in the Waukesha area here are assiniying(however you spell it) to have them installed.

I heard from a guy on Saturday night that there's a shop in Madison that charges $325 or $350 for the install. I'm going to call this week and find out for sure.


Jeff

Place in North Prairie says 500 installed using their parts and the ford dealership here said 600+my parts

$500 seems like a pretty good deal, if that includes the gears and install kit.........am I understanding this correctly?


Jeff

500 was for gears by an unknown maker and the install. I do not think that included the install kit or oil. I asked if I could use FRPP gears and they said they will never do someone's personal(even if its shipped to them from the vendor) because they had problems. IDK

Id rather find someone who can install it for 100-200

Called another shop near me, $500 plus my own parts and lube. Getting rediculous

Post on here the info you PM'd me in case others are looking for the same! I'm hoping to have mine in within a couple of months. I've spent a CRAZY amount of money on the whip in the last couple of months and need to take a break before my fiance goes ballistic on me!


Jeff

First company is FSR Performance in Port Washington, WI. He charges $275 to install but is book most of the time so you need to find out his open times. This is out of his garage when he is not at his shop but is very appreciated for his work by other forum members. Call Fritz .

The second company is Elkhorn Motors-Ford. Labor is $300.00. You can bring all the parts & things needed to do the job. The only thing extra would be shims if needed to get everything in spec. Im not sure about the oil though. His name is Marty

Just say that you were given the number from a mustang forum for the gear install