Motor Swap Section Tech and Follow-My-Build Threads for members looking to put a different engine in their Mustang

4.0L V6 to 4.6L V8 swap how-to - 2005-2010

Thread Tools
 
Search this Thread
 
Old 03-28-2018, 09:31 PM
  #11  
Daniel Diaz
 
Daniel Diaz's Avatar
 
Join Date: Mar 2018
Location: Missouri
Posts: 7
Default

And what do you mean by reprogram it?
Daniel Diaz is offline  
Old 03-28-2018, 10:06 PM
  #12  
JimC
Moderator
 
JimC's Avatar
 
Join Date: May 2006
Location: Michigan again!
Posts: 8,579
Default

You need a tune that disables the PATS, the anti-theft system doesn't recognize your key because it is programmed to the old ECM. That's why it cranks but won't start.
JimC is offline  
Old 03-28-2018, 10:07 PM
  #13  
JimC
Moderator
 
JimC's Avatar
 
Join Date: May 2006
Location: Michigan again!
Posts: 8,579
Default

Originally Posted by Daniel Diaz
. And bystart up tune will my bama tune work if I upload it sorry I'm new to this forum don't know how to work it yet.
If you upload the BAMA tune and it is for your old ECM and 4.0 you will cause more problems.
JimC is offline  
Old 03-29-2018, 06:50 AM
  #14  
Daniel Diaz
 
Daniel Diaz's Avatar
 
Join Date: Mar 2018
Location: Missouri
Posts: 7
Default

Originally Posted by JimC
If you upload the BAMA tune and it is for your old ECM and 4.0 you will cause more problems.
Thank you and no I order the tune for the v8 computer but bama is on a delay since there busy but thanks so hopefully I just need the tune and it should start right up will the theft light blink if that's what's going on?
Daniel Diaz is offline  
Old 03-29-2018, 07:11 PM
  #15  
JimC
Moderator
 
JimC's Avatar
 
Join Date: May 2006
Location: Michigan again!
Posts: 8,579
Default

Yes the theft light will blink if it doesn't recognize the key.
JimC is offline  
Old 04-08-2018, 08:34 PM
  #16  
Daniel Diaz
 
Daniel Diaz's Avatar
 
Join Date: Mar 2018
Location: Missouri
Posts: 7
Default

Originally Posted by JimC
Yes the theft light will blink if it doesn't recognize the key.
okay the car turns on and drives good only thing is the spedo doesn't work and I installed a new x pipe and I think that's what's making it look like the engine is smoking because I just have the x pipe but only when I'm getting on it
Daniel Diaz is offline  
Old 04-09-2018, 09:46 PM
  #17  
DeathpunchMarine
 
DeathpunchMarine's Avatar
 
Join Date: Apr 2018
Location: Florida
Posts: 1
Default

I am going to be doing this swap. What is the start up tune the OP was talking about. Where do i get it?
DeathpunchMarine is offline  
Old 04-10-2018, 03:24 AM
  #18  
Daniel Diaz
 
Daniel Diaz's Avatar
 
Join Date: Mar 2018
Location: Missouri
Posts: 7
Default

Originally Posted by DeathpunchMarine
I am going to be doing this swap. What is the start up tune the OP was talking about. Where do i get it?
I got it from bama bought a tuner from American muscle and asked the pats system to be deleted on the side note
Daniel Diaz is offline  
Old 04-11-2018, 02:45 PM
  #19  
Jhonboy086ERCONVERT
 
Jhonboy086ERCONVERT's Avatar
 
Join Date: Apr 2018
Location: Oklahoma
Posts: 12
Default

OK so I'm doing this swap also. but im doing a 94' 4 Valve, with a Ron Francis conversion harness, what ECM can I use? The Mark VIII Ecm that the donor car had?
Jhonboy086ERCONVERT is offline  
Old 04-11-2018, 02:46 PM
  #20  
Jhonboy086ERCONVERT
 
Jhonboy086ERCONVERT's Avatar
 
Join Date: Apr 2018
Location: Oklahoma
Posts: 12
Default

Also I guess I should have said its going into a 2008 V6 Car.
Jhonboy086ERCONVERT is offline  


Quick Reply: 4.0L V6 to 4.6L V8 swap how-to - 2005-2010



All times are GMT -5. The time now is 09:11 PM.