95 Convertible 3.6L V6 to 4.8L V8
03-16-2019, 11:25 PM
#4
Join Date: Mar 2019
Location: AZ
Posts: 16
03-16-2019, 11:34 PM
#5
3rd Gear Member
Join Date: Aug 2015
Location: SE Michigan
Posts: 939
Haha, thought so. Had to be sure!
LoboFrank's right. First thing you'll want to do is start figuring out where you're going to source an engine from. If you can find a wrecked (but not too wrecked, of course) 4.6L Mustang, that'll be your best bet towards getting all the parts you'll need (PCM, wiring harness, exhaust, etc.).
LoboFrank's right. First thing you'll want to do is start figuring out where you're going to source an engine from. If you can find a wrecked (but not too wrecked, of course) 4.6L Mustang, that'll be your best bet towards getting all the parts you'll need (PCM, wiring harness, exhaust, etc.).
09-09-2020, 05:23 PM
#6
Join Date: Sep 2020
Location: ontario
Posts: 1
Yes
I bought a 96 gt thats been a slow rollever . Have plans to use the wiring harness, gauge cluster, manual transmission, rear end, brakes and suspension on my 1999 3.8 v6 vert. Then I learned all the Ford-isms regarding PI engines. I bought a 2001 Pi from a crown Vic. Hoping my 96 PCM will run the 2001 Pi
Trying to make 375 rw horsepower
Trying to make 375 rw horsepower
Thread
Thread Starter
Forum
Replies
Last Post
BaileyT
V6 General Discussion
5
02-01-2019 03:54 PM
Jkincaide
4.0L V6 Technical Discussions
4
10-26-2018 08:32 AM