New to MF
07-28-2006, 02:53 PM
#1
Thread Starter
Join Date: Jul 2006
Posts: 1
New to MF
I just joined MF. I am currently rebuilding my '94 GT and always looking for tips and advice on parts.
Here's a little bit about my car:
Year : 1994
Model: Mustang GT
Exterior Color: Black
Transmission: Manual T5
Miles: 110,000 on Stock 302
Current Rebuild:
- Replaced stock 302 with early '70's 351W
- Rebuilt short block[ul][*] Block boiled and bored .040" over[*] Stock Crank[*] Flat Top Pistons .030" over[*] Hydraulic Cam w/ .500 lift[*] C/R 10:1[/ul]- Roush 200 Cast Heads (2.02 Intake & 1.60 Exhaust)
- Edelbrock Performer RPM Intake <-- Still deciding
- Holley 3310 Four-Barrell Carb (750Cfm) <-- Still deciding
Any suggestions?
Once the long block is done, I'll squeeze it between the fenders and start on the exhaust system.
Here's a little bit about my car:
Year : 1994
Model: Mustang GT
Exterior Color: Black
Transmission: Manual T5
Miles: 110,000 on Stock 302
Current Rebuild:
- Replaced stock 302 with early '70's 351W
- Rebuilt short block[ul][*] Block boiled and bored .040" over[*] Stock Crank[*] Flat Top Pistons .030" over[*] Hydraulic Cam w/ .500 lift[*] C/R 10:1[/ul]- Roush 200 Cast Heads (2.02 Intake & 1.60 Exhaust)
- Edelbrock Performer RPM Intake <-- Still deciding
- Holley 3310 Four-Barrell Carb (750Cfm) <-- Still deciding
Any suggestions?
Once the long block is done, I'll squeeze it between the fenders and start on the exhaust system.
