New 2007 Grabber Orange Stang
#1
New 2007 Grabber Orange Stang
Just picked one up a couple of weeks ago...check out the Gallery...
https://mustangforums.com/photosearc...filter=&page=1
This is how I bought it off the lot. Also, gonna get some Borla Stingers, the Mustang Handling Pack with new dampers, lowering springs, sway bars, and strut tower brace, black 18"' bullits, Ford Racing Decal set (always dug the completeness of the stripes from the Shelby stripes, kit includes over the bumper duals and a lower side panel Ford Racing), metal fuel door, side window deflectors, mud flaps, and at some point down the road...CAI and full rear window aluminum louvers from Visas.
Will update the photos as the work gets completed...which most of it will done this week! WOOHOO!
[IMG]local://upfiles/48052/925B3AD65C77436695BED9764FC1B2AE.jpg[/IMG]
https://mustangforums.com/photosearc...filter=&page=1
This is how I bought it off the lot. Also, gonna get some Borla Stingers, the Mustang Handling Pack with new dampers, lowering springs, sway bars, and strut tower brace, black 18"' bullits, Ford Racing Decal set (always dug the completeness of the stripes from the Shelby stripes, kit includes over the bumper duals and a lower side panel Ford Racing), metal fuel door, side window deflectors, mud flaps, and at some point down the road...CAI and full rear window aluminum louvers from Visas.
Will update the photos as the work gets completed...which most of it will done this week! WOOHOO!
[IMG]local://upfiles/48052/925B3AD65C77436695BED9764FC1B2AE.jpg[/IMG]
#7
RE: New 2007 Grabber Orange Stang
OK, got some new pics of the Stang with the mods...
Went nuts with the FRPP parts...
Added the FRPP Handling Pack
http://www.fordracingparts.com/parts...tKeyField=8976
The FRPP Exhaust Kit (ie. Borla Stingers)
http://www.fordracingparts.com/parts...tKeyField=7707
Relaced the 18" Chrome Bullitts with 18" Black Bullitts
http://www.fordracingparts.com/parts...tKeyField=8977
Replaced the stock striping with the FRPP Striping Kit (MUCH preferred the full stripe ala the Shelby)
http://www.fordracingparts.com/parts...tKeyField=8601
Also Added molded splash guards on the rear and window deflectors (plus extra alarm and wheel locks)
Still to come is a set of Visus Aluminum Louvers on the back and painting the rear wing flat black to complete the 'retroness', but so far, I'm pretty pleased. Perhaps down the road, some CIA and H or X pipe additions...(maybe in time for Spring Autocross Solo...)
Check out the new pics in my gallery:
https://mustangforums.com/photosearc...filter=&page=1
[IMG]local://upfiles/48052/30D46D62E58341C99C49BDD7405F1075.jpg[/IMG]
Went nuts with the FRPP parts...
Added the FRPP Handling Pack
http://www.fordracingparts.com/parts...tKeyField=8976
The FRPP Exhaust Kit (ie. Borla Stingers)
http://www.fordracingparts.com/parts...tKeyField=7707
Relaced the 18" Chrome Bullitts with 18" Black Bullitts
http://www.fordracingparts.com/parts...tKeyField=8977
Replaced the stock striping with the FRPP Striping Kit (MUCH preferred the full stripe ala the Shelby)
http://www.fordracingparts.com/parts...tKeyField=8601
Also Added molded splash guards on the rear and window deflectors (plus extra alarm and wheel locks)
Still to come is a set of Visus Aluminum Louvers on the back and painting the rear wing flat black to complete the 'retroness', but so far, I'm pretty pleased. Perhaps down the road, some CIA and H or X pipe additions...(maybe in time for Spring Autocross Solo...)
Check out the new pics in my gallery:
https://mustangforums.com/photosearc...filter=&page=1
[IMG]local://upfiles/48052/30D46D62E58341C99C49BDD7405F1075.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM