new member -lewisville tx here
#1
new member -lewisville tx here
Sup fellow stang owners. 01 Zinc Yellow Cobra here. Lewisville Texas location </P>
here. Need some help, im in a dilemma. I have a feeling that i need to sell the 01</P>
for a 03 due to the iron block. Im afraid to keep the 01 and super charge or turbo charge it and have potential problems due to the aluminum block. Does anyone have any suggestions. Would it be ok to keep the 01 and go forced induction and forget about buying the new one. Thanks for any help.<IMG src=smileys/smiley16.gif border="0"></P>
</P>
#3
new member -lewisville tx here
go a little farther south and I won't be the only person in my North Georgia post!<IMG src=smileys/smiley2.gif border="0"></P>
wish I could help ya: Sell the rights to your blight and you'll win</P>
#7
new member -lewisville tx here
Im not aware of any strength differences in an iron vs aluminum block, as far as I know, the generalization is the same... Aluminum blocks save weight but are more prone to warping from being overheated.</P>
#8
new member -lewisville tx here
welcome to the forum. keep it cool and you can load up on the aluminum block.. watch for compression rates when applying boost.. <edited><editID>tripsevn7</editID><editDate>37877.2825115741</editDate></edited>
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM