kinda new here
#1
kinda new here
My name is Jon and I have a 2003 Mustang Drag Radial car that I've been building for about 2 years now. The car is NHRA certified to run 8.50s. It has a custom 10 point cage with front down bars and a halo. The rear suspension is QA1 coil-overs in stock locations and an anti roll bar. Front suspension is a tubular k-member with QA1 a-arms,coil-overs and caster/camber plates. The motor is all aluminum cobra block with eagle h-beam rods and diamond pistons and a forged cobra crank with fox lake stage 2 heads and stage 2 comp cams 234/242 @ .545in lift.
Induction isa twin 67mm garrett turbo system with an accufab 105mm oval single blade TB,Logan Motorsports sheetmetal 2v intake and a SCT big-air BA-3000 MAF. Fuel system is a aeromotive stage 2 with 60lb/hr injectors. Transmission is a Viper-spec T56 with a Ram Dual-Disc clutch.
I tried to post some pics but they're not working.I used the [IMG] but it only showed the url's
Induction isa twin 67mm garrett turbo system with an accufab 105mm oval single blade TB,Logan Motorsports sheetmetal 2v intake and a SCT big-air BA-3000 MAF. Fuel system is a aeromotive stage 2 with 60lb/hr injectors. Transmission is a Viper-spec T56 with a Ram Dual-Disc clutch.
I tried to post some pics but they're not working.I used the [IMG] but it only showed the url's
Thread
Thread Starter
Forum
Replies
Last Post
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM