New girl, Where on this site do I find information of body work?
 

Just realized I posted on the wrong forum. Where on this site do I find info on body work?

Welcome, good question. You can start by using the search feature and search for something body related you are looking for and see what shows up!

I did and nothing seems to come up, but I will keep trying.

Welcome.

Thanks!

Welcome.

I haven't seen a lot of posts on body work, but I know we have at least a couple of experts that post. What is your question?

Well right now I am striping off the paint with a paint chemical remover and sanding the door by hand. Of course its taking a little long. I have asked several different people and have looked up info on sand blasting and other different media blasting. What would be best to get at least most of the paint and some of the rust of? It seems like every bod has there own opinion. What would work well for a 1969 mustang door?

Well right now I am striping off the paint with a paint chemical remover and sanding the door by hand. Of course its taking a little long. I have asked several different people and have looked up info on sand blasting and other different media blasting. What would be best to get at least most of the paint and some of the rust of? It seems like every bod has there own opinion. What would work well for a 1969 mustang door?

KKrex is online now Report Post

Welcome to the site!

This might help a little bit, or could be used as a stepping stone for info I suppose:

http://www.hotrod.com/howto/hdrp_060...g_basics_tips/