Kansas mustang
 

New here and poking around I've seen a lot of comfort zone builds and swaps. I'd like to talk to some of you that's gone outside the comfort zone. My first swap was a 94 base model manual trans mustang that I swapped the 3.8 for a carbureted 302. All I did was make my own motor mounts and bolted it to the original trans. Needless to say it was a fun car. Now I'm in possession of a beautiful 98 convertible and I pulled the 3.8 and auto trans and I now have a 351M with C6 in it. Amazingly where I did my pre fit for the engine and transmission to sit the trans mount bolt dropped right into place into the original trans brace location on the car. The problem I'm running into is that Damn break booster. Does anyone know of any company that makes custom bosters??? I would hate to go to mechanical breaking. Oh and that's not a typo it really is a 351M not a 351W

Welcome to the forum, if you post this question in the Tech section, you'll get a lot more responses. Good luck

whatsnext2187, hello and welcome on board! Glad to have you here. This site is a tremendous resource due to the members, hope you stick around and find it useful. A lot of knowledgeable guys are here to help you with any question.

Great to have you and +1 one on the tech section.

Welcome.