HELP! 1988 Mustang Fuse blowing problem!!!!
#1
HELP! 1988 Mustang Fuse blowing problem!!!!
Hello All,
I have a 1988 Mustang LX 5.0 that i need to replace the fuse #5 to get my turn signals to work but its keep getting blown. I follow the purple wire with orange stripe but nothing look short circuit.
Please help!
I have a 1988 Mustang LX 5.0 that i need to replace the fuse #5 to get my turn signals to work but its keep getting blown. I follow the purple wire with orange stripe but nothing look short circuit.
Please help!
#2
The short can be anywhere from the front to the back.
Unplug the harnesses from the assemblies, and put the signals on to see if the fuse
blows, if so, there is a short to ground, chassis side. If not, proceed:
Plug the driver side harness back in, test, if it blows, the short is in the assembly.
If it does not blow, then plug the passenger side one in, then test again if it
blows here, same deal, in the assembly.
Trial and error...
Unplug the harnesses from the assemblies, and put the signals on to see if the fuse
blows, if so, there is a short to ground, chassis side. If not, proceed:
Plug the driver side harness back in, test, if it blows, the short is in the assembly.
If it does not blow, then plug the passenger side one in, then test again if it
blows here, same deal, in the assembly.
Trial and error...
Thread
Thread Starter
Forum
Replies
Last Post
Ashley Marie Moses
GT S197 General Discussion
3
09-10-2017 06:43 PM
OregonGT
4.6L V8 Technical Discussions
13
01-12-2011 09:09 PM
tevans720
Classic Mustangs (Tech)
7
07-06-2010 06:02 PM