1999 4.6 Windsor block, heads, etc. F/S
#1
1999 4.6 Windsor block, heads, etc. F/S
I have a complete bottom end that is in perfect shape. It is a Windsor 1999 engine out of a Ford Mustang. Head gasket blew and melted the edge on two of the pistons. I have the following:
6 good pistons
8 bolt flywheel
bottom end block with crank installed & oil pan
two PI heads - one head has a boogered up spark plug hold that needs chased and cleaned up a bit. Cams come with the heads and are already installed. Heads are ready to bolt up
Head bolts, etc...harmonic balancer, pulleys, etc.
Jax, FL
6 good pistons
8 bolt flywheel
bottom end block with crank installed & oil pan
two PI heads - one head has a boogered up spark plug hold that needs chased and cleaned up a bit. Cams come with the heads and are already installed. Heads are ready to bolt up
Head bolts, etc...harmonic balancer, pulleys, etc.
Jax, FL
Thread
Thread Starter
Forum
Replies
Last Post