Lots of Misc. parts 94-04 on some!
#1
Lots of Misc. parts 94-04 on some!
Billet/Chrome/Performance and some other parts for sale for 1994-2004 Mustangs! I cannot figure out how to upload the pics but please email me and I will send them to you. I am also registered on ebay under the same name, this way you can see I have an excellent buying/selling rep. There are a few people on here who I have bought from who can vouch that I am credible. Please, please ask questions! I am a detailed person and want to be absolutely honest, that is why the descriptions are so long. Some prices are negotiable, I can only say no. All are plus shipping. Give me your address and zip and I can use FedEx at work to calculate shipping. Also pleasecheck for fitment, I will try and help to the best of my knowledge.
BBK UDPs 2001.5 – 2004 1$75
UPR Large Billet cup holder bezel 2 $25
UPR small cup holder bezelSOLD!!
Steeda Billet HVAC ***** 3 $25
Steeda Billet oil cap$35
Trac, Defrost and Fog Light Switches 4$7 each (or $20 no ship for all)
Mach 1000 amps and rack 5$175
02-04 C&L 85mm MAF housing 6$100
MGW Chrome E-brake handle $25
Stock 65mm Throttle body $10
Plastic intake manifold 7 $35
UPR Billet door pin locks$5
UPR Trick Stick shifter handleSOLD!!
UPR Billet radio ****$10 (free ship)
1 Bought here from here back in 06 for $90, never installed b/c I bought a Mach 1000 system and got Saleen UDPs instead (minus the alternator pulley). Comes with polished all three pullies, 3 crank bolts, main bolt and a large brass ring. If I can I will remove the vibration dampener that was included with it. Should save about 15 pounds on shipping.
2 Would like to exchange for your cup holder. If willing to trade I will knock off $10, this way you don’t have to drill the holes in yours and I don’t have to buy a new one.
3 These are the chrome styled ones. There are a few little nicks in them. The original owner apparently used pliers to take them off. Can only be seen close up.
4 Got these off of ebay with a purchase of a bezel. I hate to say I never plugged ‘em in to see if the work. The Defrost and Fog look like the ones on my 03GT but the trac looks like the 99-00 style (I assume they are all for 99-00, maybe 01-04). If I get a chance I will go to where my Mustang is stored and try to make sure they work. The contacts all look excellent and the buttons depress freely.
5 Never got around to checking but worked when pulled. Got these off of a friend. Four (4) amps with rack and harness. Plus the two amps from under the rear window. Needs to be cleaned, b/c it appears tape was on it. GooGone seemed to take it off, but I don’t have much left. Great starter project.
6 Bought here back in 06? Comes with air cone and black plastic cover. No longer need b/c I bought a Chicane/Saleen MAF and filter.
7 Bought on ebay over the winter for a project mock up. Used to mock up ProProd fuel rails, Powdercoated Alt, TB…until I bought a ProProd aluminum one. I cannot remember what it came off of. B/c of the alternator bolt positions (that connect to the manifold) I know it is not 02-04. So that leaves 96-01. I want to say it came off of a 99-01 b/c I bought a timing chain cover off of the same guy/car and I am pretty sure that 96-98 TC covers are different than 99-04. I will do some more digging. Oh, it does NOT have the Al (Aluminum) crossover. Will also come with a handful of bolts, thermostat, and ECT.
BBK UDPs 2001.5 – 2004 1$75
UPR Large Billet cup holder bezel 2 $25
UPR small cup holder bezelSOLD!!
Steeda Billet HVAC ***** 3 $25
Steeda Billet oil cap$35
Trac, Defrost and Fog Light Switches 4$7 each (or $20 no ship for all)
Mach 1000 amps and rack 5$175
02-04 C&L 85mm MAF housing 6$100
MGW Chrome E-brake handle $25
Stock 65mm Throttle body $10
Plastic intake manifold 7 $35
UPR Billet door pin locks$5
UPR Trick Stick shifter handleSOLD!!
UPR Billet radio ****$10 (free ship)
1 Bought here from here back in 06 for $90, never installed b/c I bought a Mach 1000 system and got Saleen UDPs instead (minus the alternator pulley). Comes with polished all three pullies, 3 crank bolts, main bolt and a large brass ring. If I can I will remove the vibration dampener that was included with it. Should save about 15 pounds on shipping.
2 Would like to exchange for your cup holder. If willing to trade I will knock off $10, this way you don’t have to drill the holes in yours and I don’t have to buy a new one.
3 These are the chrome styled ones. There are a few little nicks in them. The original owner apparently used pliers to take them off. Can only be seen close up.
4 Got these off of ebay with a purchase of a bezel. I hate to say I never plugged ‘em in to see if the work. The Defrost and Fog look like the ones on my 03GT but the trac looks like the 99-00 style (I assume they are all for 99-00, maybe 01-04). If I get a chance I will go to where my Mustang is stored and try to make sure they work. The contacts all look excellent and the buttons depress freely.
5 Never got around to checking but worked when pulled. Got these off of a friend. Four (4) amps with rack and harness. Plus the two amps from under the rear window. Needs to be cleaned, b/c it appears tape was on it. GooGone seemed to take it off, but I don’t have much left. Great starter project.
6 Bought here back in 06? Comes with air cone and black plastic cover. No longer need b/c I bought a Chicane/Saleen MAF and filter.
7 Bought on ebay over the winter for a project mock up. Used to mock up ProProd fuel rails, Powdercoated Alt, TB…until I bought a ProProd aluminum one. I cannot remember what it came off of. B/c of the alternator bolt positions (that connect to the manifold) I know it is not 02-04. So that leaves 96-01. I want to say it came off of a 99-01 b/c I bought a timing chain cover off of the same guy/car and I am pretty sure that 96-98 TC covers are different than 99-04. I will do some more digging. Oh, it does NOT have the Al (Aluminum) crossover. Will also come with a handful of bolts, thermostat, and ECT.
#2
RE: Lots of Misc. parts 94-04 on some!
Can you shoot me a pic. of the 2 cup holders, to burkhart_family4@yahoo.com. The shipping will be to 38011, and I will also trade my cup holder. Once I see the pics, I will let you know. Thanks