Parts for 4.0L/V6 2005-2010
#1
Parts for 4.0L/V6 2005-2010
Category: Drivetrain
Price: $10
Private or Vendor Listing: Private Listing
Part fits: S197
Location (State/Prov): TX
Item Condition: Used
Asking prices as listed do not include shipping, but I may include it at my option. Make offers on anything you need.
- valve covers - $40 each, $75 for the pair
- coil pack with stock spark plug wires - $40
- a/c compressor - $80
- a/c lines/twin-hoses that bolt to the compressor - $65
- throttle body (stock) with electronics - $75
- exhaust manifolds - $25
- crankshaft/main pulley - $50
- fuel rails - $25
- stock fuel injectors (set of 6) - $40
- power steering pump - $25
- stock flexplate - includes bolts and spacer - (for automatic's only) $40
- stock torque converter $40
- transmission spacer (between engine and bellhousing) - $15
- transmission steel cooling lines - $20
- egr to exhaust metal tube - $5+shipping
- crankshaft position sensor (CPK) - $10
- stock belt tensioner with 76mm ribbed pulley - $20
- flat 90mm idler pulley, water pump pulley, power steering pulley, stock belts - $10 each
- plastic ventilation hoses, both sides - $20 for the set of 2
- stock front brake rotors - $30 for the pair
- stock rear brake rotors - $30 for the pair
- stock front brake caliper brackets - $20 for the pair ($15 if purchased with above rotors)
- stock 7.5" rear end differential cover - $10
- stock front steel brake line from master cylinder to "T"; stock metric fittings on both ends, non-ABS - $10
- stock 192* Motorcraft thermostat - $5
- engine wiring harness (for automatic) - $80
- ecu/pcm for automatic - $80
- engine noise suppression capacitor - $10
- power steering pressure line (steel line with pressure sensor) - $25
- power steering cooling line (steel "loop" cooling line, hose sections on both ends) - $20
- fuel line-to-fuel rail connector hose - $10
- steel heater line assembly, mounts on/next to passenger side valve cover - $10
- heater hoses - $20 shipped for the pair
- various 4.0L smaller coolant hoses - $1-$10
- front upper grill, with Mustang pony emblem - $40
- 4.0L motor short-block, ran fine, but has a chipped piston, cylinder is OK - $200
- motor brackets (front alternator and ac/ps brackets, motor supports, etc.) - make offer
- rear brake 'dust shields' - $10 each
- rear ABS sensors - $25 (2 available)
- stock degas/coolant reservoir bottle - $25
- stock power steering reservoir - $20
- stock motor mounts - $25 for the pair
- front facia top mounting brackets (left side-only) - $10
- horn mounting bracket - $10
Various suspension parts:
- stock GT springs, struts, rear lower control arms, panhard bar, panhard brace: make offer/pm me for prices
..some pics...
Last edited by tx_zstang; 12-29-2012 at 05:29 PM.
#6
#7
Hey there!
How about the crankshaft, harmonic balancer, flywheel and rods/pistons shipped to 60143? PM please...
Thanks!
Tom
How about the crankshaft, harmonic balancer, flywheel and rods/pistons shipped to 60143? PM please...
Thanks!
Tom
Thread
Thread Starter
Forum
Replies
Last Post
nmra1965
Other Professional Racing
0
09-26-2015 10:46 AM
mrappe
V6 (1994-2004) Mustangs
0
09-26-2015 10:16 AM
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM