Pulley Question

Reply Subscribe

Thread Tools

Search this Thread

12-09-2008, 09:42 PM

Thread Starter

Join Date: Sep 2006

Location:

Posts: 44

Pulley Question

Preparing to install Vortech V2SQ non-IC with 3.33 pulley and Anderson power pipe. See sig for others mods. What kind of boost am I looking at?

Trying to decide if I need to go with a larger pulley to keep it safe on the stock bottom end. Thanks.

12-09-2008, 09:47 PM

vanquish

4th Gear Member

Join Date: Mar 2008

Location: asdf

Posts: 1,600

I think that's around 12 psi and about as far as you should go on the stock bottom end. Also past that you should have an intercooler.

12-10-2008, 07:38 AM

nanaki

Retired MF Moderator

Join Date: Aug 2004

Posts: 14,891

Quote:

Originally Posted by vanquish

I think that's around 12 psi and about as far as you should go on the stock bottom end. Also past that you should have an intercooler.

or meth injection! i actually had 12psi with a 3.1 pulley when my GT was on the stock motor. i ran snow performance's meth inject system.... i went through 2 safe injection boxes and a pump. i would not recommend them.