Correct belt for 3.60 pulley Vortech V2-SQ

Reply Subscribe

Thread Tools

Search this Thread

04-22-2012, 11:23 AM

Thread Starter

Join Date: Sep 2006

Location:

Posts: 44

Correct belt for 3.60 pulley Vortech V2-SQ

Is the Gates K061080 the correct belt size for Vortech V2-SQ blower with stock 3.60 pulley? Also, can the same belt be used if I switch to a 3.33 pulley? This is for a 04 Mustang GT. Thanks.

05-18-2012, 05:53 PM

Thread Starter

Join Date: Sep 2006

Location:

Posts: 44

Did some digging around the forums and found this is a 108 ¾" belt and will work with both the 3.6" and 3.33" pulley.

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

4 Valve Head questions

GimpyHSHS

4.6L (1996-2004 Modular) Mustang

12-19-2023 01:12 PM

Chassis wiggle when off throttle?

UrS4

S197 Handling Section

10-03-2015 06:23 AM

High Pitch Whine. Help?

FivePointToTheOh

2005-2014 Mustangs

09-29-2015 12:53 PM

I did a Video on Measuring for a New Serpentine Belt after a Smog Pump Delete on a 95

autoedit

General Tech

09-27-2015 06:37 PM

cobra vs heavy hitter vette's

ctgreddy

Street/Strip

09-20-2015 08:35 PM