20" GFG Staggered Wheels with Pirelli Rosso tires
03-01-2010, 11:43 PM
#11
2nd Gear Member
Thread Starter
Join Date: Jun 2006
Location:
Posts: 413
http://www.modularfords.com/forums/s....php?p=1301885
There's a link to some better pictures of the wheels on the mustang. That is not my car, but those are the same wheels. It sure makes me wish I had lowered my car while I had it.
There's a link to some better pictures of the wheels on the mustang. That is not my car, but those are the same wheels. It sure makes me wish I had lowered my car while I had it.
03-02-2010, 11:25 AM
#13
2nd Gear Member
Thread Starter
Join Date: Jun 2006
Location:
Posts: 413
yes they are....there seems to be interest in them, however nobody has raised the bid of $650 yet. with the interest in them, I'd hate to see them go for $650, but they will if nobody else bids.
03-02-2010, 11:33 AM
#14
Salad Farts
Join Date: Jun 2008
Location: oklahoma
Posts: 474
wow i cant believe those are going for 650! especially 20"
i would expect those to be going for at least 800
i would expect those to be going for at least 800
03-02-2010, 12:20 PM
#15
2nd Gear Member
Join Date: Oct 2009
Location: Naperville, Illinois
Posts: 279
What scares me is the vibration. Have you had a tire and wheel shop check them out for roundness and balance? Is a wheel bent?
03-02-2010, 12:24 PM
#16
2nd Gear Member
Join Date: Oct 2009
Location: Naperville, Illinois
Posts: 279
Are they the exact same? The URL mustang looks like they are polished or chrome? Are yours polished, chrome, or grey paint?
http://www.modularfords.com/forums/s....php?p=1301885
There's a link to some better pictures of the wheels on the mustang. That is not my car, but those are the same wheels. It sure makes me wish I had lowered my car while I had it.
There's a link to some better pictures of the wheels on the mustang. That is not my car, but those are the same wheels. It sure makes me wish I had lowered my car while I had it.
03-02-2010, 01:23 PM
#17
2nd Gear Member
Thread Starter
Join Date: Jun 2006
Location:
Posts: 413
Mine have the polished lip with a regular aluminum look spokes. I guess the link is perhaps a fully chromed wheel.
03-02-2010, 01:34 PM
#18
2nd Gear Member
Thread Starter
Join Date: Jun 2006
Location:
Posts: 413
I did have a wheel shop balance them and they assured me that they're not bent and that they are balanced. I've heard the hub-centric rings, with any aftermarket wheel, can help this. The worst case scenario is having to replace the front tires, however I'd probably bring them to a better shop that specialized with bigger wheels as these guys acted like they had never seen a set of 20's before.
I also found out, the hard way, that there is no way to air these tires up without some valve extensions (which you remove after checking pressures) so I will include those to the winner. They all hold air just fine, no leaks.
I also found out, the hard way, that there is no way to air these tires up without some valve extensions (which you remove after checking pressures) so I will include those to the winner. They all hold air just fine, no leaks.
03-02-2010, 03:45 PM
#19
Join Date: Jul 2008
Location: NJ
Posts: 9
Loos06, nicely done on those videos. I especially like the finish!
