Lowered car - rear bump stop question
07-09-2007, 10:09 AM
#1
Thread Starter
Join Date: Apr 2007
Location: Portland, OR
Posts: 3
Lowered car - rear bump stop question
I lowered my 07 Vert this wekend and put the following parts in:
Tokico D-Specs, KW lowering springs, Spohn adj. LCAs, UCA and Panhard Bar, CHE Panhard Bar Brace and J&M Upper Camber Plat Strut Mounts.
Looks and feels great so far.
The car came down quite a bit in the rear (almost 2") and now there is not a lot of clearance between the rear bump stops and the body, approx. 1". So far I have not bottomed out but I am wondering if there are replacement bump stops or if anybody has cut them? Any pointers would be greatly appreciated.
Thanks a lot in advance.
Tokico D-Specs, KW lowering springs, Spohn adj. LCAs, UCA and Panhard Bar, CHE Panhard Bar Brace and J&M Upper Camber Plat Strut Mounts.
Looks and feels great so far.
The car came down quite a bit in the rear (almost 2") and now there is not a lot of clearance between the rear bump stops and the body, approx. 1". So far I have not bottomed out but I am wondering if there are replacement bump stops or if anybody has cut them? Any pointers would be greatly appreciated.
Thanks a lot in advance.
Thread
Thread Starter
Forum
Replies
Last Post
inyadreems
Archive - Mustangs For Sale
2
08-21-2015 09:10 AM
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
Milan Dragway
Members Rides and Car Show Section
0
08-12-2015 03:43 PM
