americanmuscle255

I'ver searched around, but I still can't find the answer to my question!

I want to buy some Weld racing rims (15x10, 15x6(fronts)). I'm having trouble finding the right rim size for my stang... as well as tire. I was going to go with some hoosier slicks. I think...28x10x15

please help!

zkiller

Weld wheels wont fit. You would need spacers for those wheels, not an option if you will be NHRA inspected. Bogarts are the only racing wheels that will bolt right on and they still require relocation brackets. There were some older Weld wheels that fit (XP?) but those are nect to impossible to find.

iwannagofast

Why wouldnt the 15x6 fit the front it seems to me you could get zero backspacing and it should still fit.

zkiller

The rears are the issue. They hit the calipers and LCA mounts. That is why you need relo brackets with the Bogarts also.

desslok40

Forget about smaller wheels, too much of a pain !!

Extra set of (2)17x8 bullit wheels off of craigslist: $120
M/T ET drag radials(275/40/17) from Summit Racing : $360
Mounting and balancing @ Discount Tire: $30

Never spinning again: PRICELESS !!!!!!!


LOL

AmericanMuscle4.6GT

talk to s197richie

he's got some for sale at what i think are fantastic prices.

ModernMuscle

I have a new prostar that I bought, and dont want to go through the hassle of modifying it, its a 15x10 with 6.5 bs...wanting 150
i was so excited when I got it, and then it wouldnt fit.

androdz

For the rear you need 6 3/4 offset and a spacer of 1/2 to clear the rear calipers.

Andrew

americanmuscle255

realating to what wheels?

androdz

bogarts