19 X 8.5 all round???
#1
19 X 8.5 all round???
does anyone have pics of 19 X 8.5 all round? i wanted to go 19 X 10 in rear but the offset is 22 which doesnt clear the calibers right? the offset for the 19 X8.5's are either 17 or 45 which would allow me to clearif i went 8.5's all round.will it still look good?
pics please
[IMG]local://upfiles/88128/E695B0FD00164E1DA7E7B901DB3A1EE0.jpg[/IMG]
pics please
[IMG]local://upfiles/88128/E695B0FD00164E1DA7E7B901DB3A1EE0.jpg[/IMG]
#3
RE: 19 X 8.5 all round???
sorry, not sure why the pics did not come through. Everything said it uploaded so I am going to try again.
[IMG]local://upfiles/97064/2A07E6A7D2DB49BABE1CCEEB5FF0096F.jpg[/IMG]
[IMG]local://upfiles/97064/38B6B89986E24AA08B519B56F7A6BB9A.jpg[/IMG]
[IMG]local://upfiles/97064/0747A635ED044E64A7EA5B9151002B72.jpg[/IMG]
[IMG]local://upfiles/97064/2A07E6A7D2DB49BABE1CCEEB5FF0096F.jpg[/IMG]
[IMG]local://upfiles/97064/38B6B89986E24AA08B519B56F7A6BB9A.jpg[/IMG]
[IMG]local://upfiles/97064/0747A635ED044E64A7EA5B9151002B72.jpg[/IMG]
#4
RE: 19 X 8.5 all round???
ORIGINAL: vaporGT
does anyone have pics of 19 X 8.5 all round? i wanted to go 19 X 10 in rear but the offset is 22 which doesnt clear the calibers right? the offset for the 19 X8.5's are either 17 or 45 which would allow me to clearif i went 8.5's all round.will it still look good?
does anyone have pics of 19 X 8.5 all round? i wanted to go 19 X 10 in rear but the offset is 22 which doesnt clear the calibers right? the offset for the 19 X8.5's are either 17 or 45 which would allow me to clearif i went 8.5's all round.will it still look good?
***HERE*** are some picsin the later posts of this thread if curious.
Jazzer
#6
RE: 19 X 8.5 all round???
Im runninng 19 x 8.5 front and 19 x 9.5 in back you probablyneed a 40 mm offset on back.
If your heart is set on those rims like said before you can get small spacers in 1/8 increments I believe. to clear your rotors.
oh yea 245 x40 front and 295 x35 bfg kdw2 tires in case that was gonna be your other question.
good luck on your Rim hunt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!
If your heart is set on those rims like said before you can get small spacers in 1/8 increments I believe. to clear your rotors.
oh yea 245 x40 front and 295 x35 bfg kdw2 tires in case that was gonna be your other question.
good luck on your Rim hunt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!
#7
RE: 19 X 8.5 all round???
Based on yb's info, youwill need to replace your lug bolts to get wide enough spacer to clear caliper. Going from +22mm ~ +40mm is over 5/8" and I wouldn't go that much without new bolts. It is worth doing if you really want those rims
Jazzer
Jazzer
#8
RE: 19 X 8.5 all round???
thanks for all the replies.. i think as of right now i might go with 19 X 8.5fronts and backswith the 45 offset so i clear all the calibers. anyone see any problem with that? look wise or just mechanically?
also any tire suggestions for 19 X 8.5 45 offset?
also any tire suggestions for 19 X 8.5 45 offset?
#9
RE: 19 X 8.5 all round???
Hold on there, mister
Something occured to me last night after I posted. The off-set will not necessarily create an issue, as with the wheel you have pictured.THAT wheel hasthe face or spokes way outward toward the front face. This area is much deeper than the actual mounting face of wheel itself, and leaves a "void" where the caliper should have proper clerance (the wider the wheel, the larger the "void"). If it were adeep-dish wheel, the spokes would be set farther back toward the mounting face and would have less"void" for calipers.
Hereare a couple pics. Onewith the void and should give you the cearance you need and the other showing caliper and how it should fit into this void. Look at dimension "A" of caliper pic, you will see that it will fit into the void. This is the dimension you need to address, NOT the
off-set.
Jazzer
[IMG]local://upfiles/39838/D57B0F19719647ECB975D239F1799B96.jpg[/IMG]
[IMG]local://upfiles/39838/FE53AFB9071F4A4CA2DB944922766395.jpg[/IMG]
Something occured to me last night after I posted. The off-set will not necessarily create an issue, as with the wheel you have pictured.THAT wheel hasthe face or spokes way outward toward the front face. This area is much deeper than the actual mounting face of wheel itself, and leaves a "void" where the caliper should have proper clerance (the wider the wheel, the larger the "void"). If it were adeep-dish wheel, the spokes would be set farther back toward the mounting face and would have less"void" for calipers.
Hereare a couple pics. Onewith the void and should give you the cearance you need and the other showing caliper and how it should fit into this void. Look at dimension "A" of caliper pic, you will see that it will fit into the void. This is the dimension you need to address, NOT the
off-set.
Jazzer
[IMG]local://upfiles/39838/D57B0F19719647ECB975D239F1799B96.jpg[/IMG]
[IMG]local://upfiles/39838/FE53AFB9071F4A4CA2DB944922766395.jpg[/IMG]
#10
RE: 19 X 8.5 all round???
wow i didnt even think it worked that way.. like with an individual case for each particular wheel. it sucks not knowing that much about wheels.. complicated stuff. so how do you think i could find out if the void will be large enough? do you think by calling a wheel and body shop around the area they would be able to give me a clean yes or no?