Sam Strano

I firmly believe that these are the best sway bars for the S197 Mustang--that's why I build them. Based on my knowledge and testing gained from 16 years of SCCA experience and 14 National Championships.

I've tested numerous bars and combinations of bars, and felt I could do better. So I took up the challenge to do just that.

Strano bars are 3 positions adjustable on not only the front, but the rear of the car as well!

Strano bars are tubular and lighter than most. A lot of companies make a tubular front, hardly anyone does that for the rear--but we do.

Strano bars are proven in competition and on the street and allow quick changes to the balance and performance of the car. The fact both front and rear are adjustable gives you many more choices in dialing in the handling to you preference. Range of adjustment is large and allows for use with numerous different spring rates.

Strano bars fit in the OEM location. No cutting, welding, or clamps to put on the axle to make them fit.

Strano bars fit both Steeda and Fays2 Watts linkages, this was an important design criteria when building the bars. Not all bars fit with Watts linkages.

8336 Front bar: http://www.stranoparts.com/partdetai...D=80&ModelID=5

8337 Rear bar: http://www.stranoparts.com/partdetai...=80&PartID=609

S197SB1 Bar set without endlinks: http://www.stranoparts.com/partdetai...=80&PartID=717

S198SB2 Bar set with endlinks: http://www.stranoparts.com/partdetai...=80&PartID=718

In stock and ready to ship! PLEASE feel free to ask if you have any questions!

imfamousjim

I gotta weigh in on my experience with Sam's bars too.. I love 'em. I was having some trouble with my car pushing midcorner (Or should I say, having trouble getting the car to compensate for my mistakes while driving). Soon as I put these on, the car was instantly more neutral, and so much easier/more fun to drive.

Not to mention Sam's setup advice is second to none