Panhard length?
Can someone please tell me the length of the 05-11 'stang panhard bar center of bushing- to - center of bushing?
I am hoping someone has a stock unit laying around after lowering that they can put a tape measure to, or maybe an adjustable unit they haven't installed yet. I have searched the forum ,but couldn't find any exact measurement. -Brad |
REALLY?!
Anyone?
|
PHB Length
My guess is that there is no exact measurement; that each car depending on tolerances and equipment will vary, thus the need for aftermarket adjustable ones.:icon_cool:
|
Originally Posted by azrampage
(Post 7396362)
My guess is that there is no exact measurement; that each car depending on tolerances and equipment will vary, thus the need for aftermarket adjustable ones.:icon_cool:
OP, I'll measure mine for you later this evening to get you a rough idea. However, I did cut my stock panhard bar in half out of boredom one evening, so it wont be an exact measurement, be off by a few MM to account for the thickness of the saw blade. |
PHB Lengths
Good point. I guess that most "standard" Mustangs will have a common length.
However, I recently put Vogtland springs in mine and the body moved to the left (drivers side) at least 1/2", and I'm not as low as the Shelbys or Bullitts. Gotta be more than one length from the factory. |
OEM off an "06 GT 41 3/4" center to center.
|
Perfect!
Thank you so much J2L06GT!! Narrows my search for a panhard bar to fit my application! |
All times are GMT -5. The time now is 11:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands