MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   S197 Handling Section (https://mustangforums.com/forum/s197-handling-section-121/)
-   -   Which sauspension should I go with? (https://mustangforums.com/forum/s197-handling-section/736843-which-sauspension-should-i-go-with.html)

Lgarretto 02-17-2019 11:29 AM

Which suspension should I go with?
 
hi guys. I’m having a bit of trouble finding anything very definitive so I figured I’d just ask.
I have an 06 gt with 75k. All stock. I have a supercharger ready to go on. I am looking at suspension. I would like to lower the car for aesthetic purposes, but also to have a bit better handling. Particularly since the blower will add so much power. I have roughly $750 to spend. Or so. In that price point what is the best option for me in your opinions? I am considering st suspensions sporttech springs and shocks. Or possibly just springs, maybe bmr springs. And a panhard bar of course. Is there a better option in my price point?
thanks

proeagles 02-17-2019 12:29 PM

Never do just springs. Forget the panhard bar, not really necessary unless you are just anal about the less than 1/4 inch offset of the suspension after lowering. You wouldn't even notice it unless someone pointed it out. Springs and shocks are going to be in your price range. Check our vendors for competitive prices on Eibach.

Lgarretto 02-17-2019 01:21 PM

Ok. So a panhard bar isn’t really necessary? I haven’t lowered a car before. But I read in several places it was. Even with an inch and a half drop or so? I would like a little more than an inch lower

Norm Peterson 02-18-2019 07:55 AM


Originally Posted by Lgarretto (Post 8646066)
Ok. So a panhard bar isn’t really necessary? I haven’t lowered a car before. But I read in several places it was. Even with an inch and a half drop or so? I would like a little more than an inch lower

Wait until after you've lowered the car and driven it a bit first.

When you lower the car, loosen all of the control arm (and PHB) fasteners so you can settle the car in at its new ride height (by bouncing it or gently driving it slowly a few feet forward and a few feet backward). Retorque those fasteners with the full weight of the car on its wheels. You'll need either ramps or a drive-on lift. The reason for this is so you won't overstress the bushing material (over-strain it is probably more correct).


Norm


All times are GMT -5. The time now is 10:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands