Pony caps on 18" bullitts
12-11-2007, 01:00 PM
#1
6th Gear Member
Thread Starter
Join Date: Apr 2005
Location: West Los Angeles
Posts: 5,390
Pony caps on 18" bullitts
So I am going to get new rims, am pretty sure I want black bullitts. I love the 18" ones on the Shelby GT but was wondering if my Pony spinners will fit on those. I know it's not too big a deal if they don't fit But I like the look.
Could someone check? The stock cap (which is the same diameter) measures 2 5/8" wide (about 67mm).
I'm assuming the Shelby GT is coming with the normal Pony cap, but you never know if the size might be different.
Thanks!
[IMG]local://upfiles/15212/0C0849893D1C4A0B9A61B8A86CC899D8.jpg[/IMG]
Could someone check? The stock cap (which is the same diameter) measures 2 5/8" wide (about 67mm).
I'm assuming the Shelby GT is coming with the normal Pony cap, but you never know if the size might be different.
Thanks!
[IMG]local://upfiles/15212/0C0849893D1C4A0B9A61B8A86CC899D8.jpg[/IMG]
12-29-2007, 11:45 AM
#2
6th Gear Member
Thread Starter
Join Date: Apr 2005
Location: West Los Angeles
Posts: 5,390
RE: Pony caps on 18" bullitts
No response? I'll assume it was just a busy holiday season!
Anyway, here's the spinners on my 17" Ford Bullitts
[IMG]local://upfiles/15212/06805CD4D7E84634A76E69C255DB4AED.jpg[/IMG]
Anyway, here's the spinners on my 17" Ford Bullitts
[IMG]local://upfiles/15212/06805CD4D7E84634A76E69C255DB4AED.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
JDWalton
4.6L V8 Technical Discussions
8
09-24-2015 08:47 PM