saleen intake
#2
RE: saleen intake
ORIGINAL: 86GreenMachine
Is there an saleen intake manifold for the fox bodies with the 5.0?If there is where would i get a hold of one.Thanx
Is there an saleen intake manifold for the fox bodies with the 5.0?If there is where would i get a hold of one.Thanx
An image and original pricing can be found on the vintage Saleen Performance Parts ads from the early 1990s
http://www.soec.org/literature/advertisements/
Used or NOS from a spare parts bin or collector are the only place you will find these. Different castings exist.
[IMG]local://upfiles/34508/7927568A8CBF442787775759A6C8B8E3.jpg[/IMG]
[IMG]local://upfiles/34508/D38AC7ECA57D4A22B98CC9891B5414FB.jpg[/IMG]
[IMG]local://upfiles/34508/4EEC60A61C3C45639D4759AE432F6BA5.jpg[/IMG]
#3
RE: saleen intake
I had one of those put on my 89#709 ported and polished to the lower intake and matched to my heads, I had some other mods, but that intake was the best $700 I spent when I did the upgrades back in 95. You can find them once in awhile on E bay.
Good luck.
Good luck.
#4
RE: saleen intake
Best place to get one is ebay, there fairly expensive. Also they have a cool design that other intakes dont, there are bosse's on the side that at the time could be drilled out for extra injectors, this was before many people were offing bigger injectors
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM