Just a previewof how its going!
01-07-2009, 06:41 PM
#1
2nd Gear Member
Thread Starter
Join Date: Dec 2007
Location: TEXAS
Posts: 195
Just a previewof how its going!
Hey whats up everyone! First of all Happy New Year! mostmight remember me im chris I used to be online almost everyday lol But ive been getting held up with work and stuff going on at home so.... :/
Anyways I wanted to show you how my project is comming along she is almost done so here some pictures. More will be comming soon
Let me know what you think
Its still a 4.6
Built motor from CHP
Vt stage 3 cams 547 lift
stage II patriot heads
and of course a big bore 2.6L Kenne Bell
Anyways I wanted to show you how my project is comming along she is almost done so here some pictures. More will be comming soon
Let me know what you think
Its still a 4.6
Built motor from CHP
Vt stage 3 cams 547 lift
stage II patriot heads
and of course a big bore 2.6L Kenne Bell
01-19-2009, 04:45 AM
#6
2nd Gear Member
Thread Starter
Join Date: Dec 2007
Location: TEXAS
Posts: 195
Sorry I took so long to write back 
I'm expecting to put down anywhere from 520-600 rwhp
With that big a** blower pully I have
I also went 31 spline on my differential and axles
Longtubes, off road x pipe
stage II clutch from ram with a steel flywheel
So hopefully that will harness alot of my power haha
Ill be boostn about 12 lbs to start off then im gonna break in the motor
Then 20LBS HERE I COME BABY!!!
and after I get used to the 20 lbs
ill be spraying her down with some good o'l NITROUS!
I'm expecting to put down anywhere from 520-600 rwhp
With that big a** blower pully I have
I also went 31 spline on my differential and axles
Longtubes, off road x pipe
stage II clutch from ram with a steel flywheel
So hopefully that will harness alot of my power haha
Ill be boostn about 12 lbs to start off then im gonna break in the motor
Then 20LBS HERE I COME BABY!!!
and after I get used to the 20 lbs
ill be spraying her down with some good o'l NITROUS!
01-19-2009, 10:35 AM
#7
3rd Gear Member
Join Date: Jul 2008
Location: Rimrock, AZ
Posts: 505
Sorry I took so long to write back
I'm expecting to put down anywhere from 520-600 rwhp
With that big a** blower pully I have
I also went 31 spline on my differential and axles
Longtubes, off road x pipe
stage II clutch from ram with a steel flywheel
So hopefully that will harness alot of my power haha
Ill be boostn about 12 lbs to start off then im gonna break in the motor
Then 20LBS HERE I COME BABY!!!
and after I get used to the 20 lbs
ill be spraying her down with some good o'l NITROUS!
I'm expecting to put down anywhere from 520-600 rwhp
With that big a** blower pully I have
I also went 31 spline on my differential and axles
Longtubes, off road x pipe
stage II clutch from ram with a steel flywheel
So hopefully that will harness alot of my power haha
Ill be boostn about 12 lbs to start off then im gonna break in the motor
Then 20LBS HERE I COME BABY!!!
and after I get used to the 20 lbs
ill be spraying her down with some good o'l NITROUS!
and when you are done with all that we will call you Mr President (ref to your sig) of course.
mike