ebalderas

Hey guys i have a 2011 Roush Stage 2. About a yr ago my rear suspension starting squeaking and then clunking when going over speed bumps or bumpy roads. So i took it to ford and they replaced the rear sway bar bushings. Problem solved. Well months later same problem but now the Ford warranty exprired and the aftermarket warranty kicked in. Well according to the aftermarket warranty Roush parts are considered aftermarket so they dont cover them. So i decided to just grease the bushing myself until they got worse. Well they have gotten worse and the clunking is really bad so i want to replace them with somethings of better quality, easier installation, and atleast regreasable. I do not want to use the crappy Roush links/bushings.

Ive seen alot of aftermarket sway barlinks/bushings and ive done my research. My problem is finding the right size. I measured my rear sway bar and it measures about 25mm (a little over).

Does anyone know the correct Diameter (is it 25mm exactly)?
Does anyone know of any aftermarket sway bar links/bushings i can buy?

I read somewhere that the Boss mustang has 25mm rear sway bar. This is the only option ive found so far. I still need to confirm if correct.

If anyone can help. Please advise. the clunking is driving me nuts.