Notices
V6 S197 General Discussion This section is for technical discussions pertaining specifically to the V6 variation of the 2005 and newer Ford Mustang.

Help with door jamb sensor/door lock actuator!

Thread Tools
 
Search this Thread
 
Old 07-19-2019, 07:44 PM
  #1  
JonnyThrice
Thread Starter
 
JonnyThrice's Avatar
 
Join Date: Jul 2019
Location: CA
Posts: 1
Question Help with door jamb sensor/door lock actuator!

Hey all!

I recently purchased a used 2013 V6 Convertible. Everything was fine for a week, but now I am getting the dreaded "DRIVERS DOOR AJAR" message on the info screen, and the interior lights wont shut off. I removed the bulbs from the overhead console.

As per everyone's advice here, I've sprayed the crap out of the latch with WD-40 and slammed the door numerous times, but it didnt seem to help.

So I'm looking to replace the door jamb switch I assume. I see the door jamb switch available online, but I also see the entire assembly available as well. Does anyone know if the door jamb switch is replaceable? Or is the entire thing one piece?

https://www.rockauto.com/en/moreinfo...503919&jsn=457

or this

https://www.rockauto.com/en/moreinfo...503919&jsn=519


Can anyone please clarify?

Thanks!
JonnyThrice is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
66and06stangs
V6 S197 General Discussion
9
02-13-2015 11:21 AM
tadpole1969
4.6L (1996-2004 Modular) Mustang
2
11-27-2013 09:27 PM
mkrosal
5.0L (1979-1995) Mustang
2
08-03-2011 05:50 PM
ryan_89_mustang
5.0L (1979-1995) Mustang
7
05-20-2009 01:01 PM
clarehills
4.6L (1996-2004 Modular) Mustang
9
12-17-2007 11:35 PM



Quick Reply: Help with door jamb sensor/door lock actuator!



All times are GMT -5. The time now is 08:03 PM.