Rear axle sits too far back after new lower control arms
#1
Rear axle sits too far back after new lower control arms
My 04 GT was way too low after some bad mods by previous owner so I installed J&M adjustable lower control arms that allow you to adjust the spring cup higher.
Turns out the new lower control arms are longer than the previous ones and my axle moved back at least an inch, I can't even get my middle finger in between the tire and the fender back-top edge
At this point I think my options are limited as the new lowers only adjust up and down(not in and out). Any tips would be appreciated..
Turns out the new lower control arms are longer than the previous ones and my axle moved back at least an inch, I can't even get my middle finger in between the tire and the fender back-top edge
At this point I think my options are limited as the new lowers only adjust up and down(not in and out). Any tips would be appreciated..