SVT Forums

question for the portrd eaton guys

Thread Tools
 
Search this Thread
 
Old 03-27-2007, 05:47 PM
  #1  
Blownsvt
5th Gear Member
Thread Starter
 
Blownsvt's Avatar
 
Join Date: Jul 2006
Location:
Posts: 2,407
Default question for the portrd eaton guys

hey i just got a stage 3 blower and have been gettin everything ready for the install, so far i have the blower, i ordered a 4# lower, a MAFia, an lfp super cooler and a 3.2 alternator pulley. anything else i will need that you can think of? am i going to need a boost a pump or bigger injectors?
Blownsvt is offline  
Old 03-27-2007, 07:54 PM
  #2  
spray175
3rd Gear Member
 
spray175's Avatar
 
Join Date: Nov 2005
Location: Maryland
Posts: 926
Default RE: question for the portrd eaton guys

You most likely will max out the stock fuel system with a 2.76 upper and 4lb lower. I would get 60's and a BAP, I maxed out a ported blower with just the 2.76.
spray175 is offline  
Old 03-27-2007, 10:57 PM
  #3  
03supercobra
1st Gear Member
 
03supercobra's Avatar
 
Join Date: Nov 2006
Location:
Posts: 140
Default RE: question for the portrd eaton guys

i heard with that combination u gonna need 60# injectors, kb boost a pump, and a good dyno tune
03supercobra is offline  
Old 03-28-2007, 01:11 AM
  #4  
JamesTronix
2nd Gear Member
 
JamesTronix's Avatar
 
Join Date: Jul 2006
Location:
Posts: 398
Default RE: question for the portrd eaton guys

You will definitely need to upgrade the fuel system.
JamesTronix is offline  
Old 03-28-2007, 03:10 AM
  #5  
Blownsvt
5th Gear Member
Thread Starter
 
Blownsvt's Avatar
 
Join Date: Jul 2006
Location:
Posts: 2,407
Default RE: question for the portrd eaton guys

i am going to go with the 60# injectors and the kenne bell bap
Blownsvt is offline  
Old 03-28-2007, 03:56 PM
  #6  
ZAXJAX
3rd Gear Member
 
ZAXJAX's Avatar
 
Join Date: Jan 2006
Location:
Posts: 579
Default RE: question for the portrd eaton guys

60# injectors, tune, svt focus or ford gt fuel pumps as well
ZAXJAX is offline  
Old 03-28-2007, 10:20 PM
  #7  
Blownsvt
5th Gear Member
Thread Starter
 
Blownsvt's Avatar
 
Join Date: Jul 2006
Location:
Posts: 2,407
Default RE: question for the portrd eaton guys

got all of that stuff, but the bap is more than sufficient for the setup, no need to change the pump itself yet.
Blownsvt is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
7
08-29-2015 06:30 PM
toastintx64
Classic Mustangs (Tech)
1
08-29-2015 05:12 PM
Soldier GT
4.6L (1996-2004 Modular) Mustang
9
08-12-2015 03:46 PM
StangMuscle
Motor Swap Section
0
08-12-2015 07:27 AM
mustangfan305
5.0L (1979-1995) Mustang
3
08-07-2015 11:09 AM



Quick Reply: question for the portrd eaton guys



All times are GMT -5. The time now is 06:02 PM.