stock compression
#1
stock compression
What's the compression supposed to be on an 03 cobra in psi? I'm getting a compression test on one I might buy and wanted to make sure nothing was out of whack. Thanks
Also, if the car had been pullied and damgaed and then put back to stock would it show up on the test?
Also, if the car had been pullied and damgaed and then put back to stock would it show up on the test?
Last edited by mattj1234; 09-03-2008 at 05:15 PM.
#5
it varies from car to car and altitude/barometric psi. run compression on all 8 cylinder like stated and make sure no cylinders are more then 20% apart, ford says even more then 20% is in specs but i prefer to use 20%
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
7
09-29-2015 09:18 PM
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM