15's on a terminator
02-08-2010, 09:13 PM
Thread Starter
Join Date: Feb 2010
Location: Colorado
Posts: 23
15's on a terminator
my dad has an 03 cobra with the stock brakes on the back and was wondering if he can fit a 15x10 drag lite on the back without rubbing on the brakes..he is running the stock wheels on the front, but just wanted to get some slicks for the back on a 15 inch wheel to get a bit of a wrinkle out of them...so will a 15 inch wheel fit over the stock cobra brakes only in the rear?
02-08-2010, 09:15 PM
4th Gear Member
Join Date: Feb 2008
Location: Long Island, New York
Posts: 1,858
dependng on the backspacing of the wheel you might need wheel spacers
02-08-2010, 10:59 PM
Banned
Join Date: Aug 2007
Location: AZ
Posts: 2,463
NO... I tried and was unsuccessful... I am running stock GT brakes on the Rear now to fit my 15" prostars
02-09-2010, 03:08 PM
Thread Starter
Join Date: Feb 2010
Location: Colorado
Posts: 23
02-10-2010, 09:51 PM
3rd Gear Member
Join Date: Jun 2006
Location: Massachuetts
Posts: 705
Gotta do some grinding on the tie rod end to fit 15's on the IRS.
02-11-2010, 01:58 AM
Join Date: Feb 2010
Location: Illinois
Posts: 4
My friend had to get rid of his because they wouldn't fit properly.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bokeo
Street/Strip
6
10-10-2015 08:28 PM
logan409
4.6L (1996-2004 Modular) Mustang
10
09-26-2015 07:43 PM
SteelerNation82
V6 (1994-2004) Mustangs
1
09-16-2015 07:11 AM
wilsonro
4 Cylinder NA and Turbo
0
09-11-2015 07:13 AM
Mobiusone stang
2005-2014 Mustangs
7
09-07-2015 08:46 PM