5SPD07GT

I was pressed for time and I am not finished but I did get a decent start on polishing the Ford emblem and "SVT" on the eaton. I first taped off the surrounding area, then went from 100 -> 150 -> 1000 grit sandpaper. I just used what i already had for a lack of time. Once i sanded it i cleaned off the area then used a little metal polish. It still needs work but its not bad. I will pick up some sandpaper in between the 150-1000 and work on it some more later in the week.

Started with this...



then...



and what it looked like when i had to quit...




Again, pics were taken with my iphone.

Mustang3GT07

Looks damn good man! I may have to do they same thing, except I might paint my letters.

5SPD07GT

i thought about painting mine, not sure yet. the polished look matches the pulleys pretty good. still have to work on it some more

BraMas

If you have a dremel you can polish the emblems up nicely

Snakebite64

Looking good

5SPD07GT

You have to be careful with the dremel, it's easy to get uneven and really mess it up

Timspony

Nice job Nate....you're giving us more ideas!

5SPD07GT

haha yeah i donno whats going on. I've been on a roll this past week

zporta

nate u must be bored

5SPD07GT

you'll see soon enough Zak. Wait about 5yrs from now