Let the 2011 Mods Begin!!!!
#11
OK...the Eaton is off & was sent to POSI Performance today! ...should have it back at the end of next week!!!
Here's a few pics...
...And the Box/crate that my friend made me to ship (Eaton is secured with 4 bolts on the bottom of the crate)
Here's a few pics...
...And the Box/crate that my friend made me to ship (Eaton is secured with 4 bolts on the bottom of the crate)
#12
...Well I got the Even Flow heading cooling mod on yesterday!! ...Was a little tough getting the freeze-out plug out of the rear of the head, but it's done!
I can't image trying to do that with a SC on the car!
I can't image trying to do that with a SC on the car!
#14
Very nice Tim! That was one of my first mods I did and did it with the SC still on the car haha.
#15
Even Fool Head cooling Mod...I will add zip ties up everything up once the Eaton is bolted back on!
I also had a little extra time....some I painted the Bridge & some other cast parts with Cast Grey Paint (actually pretty close to my DSG color...looks good)
I also had a little extra time....some I painted the Bridge & some other cast parts with Cast Grey Paint (actually pretty close to my DSG color...looks good)
#17
Looking good Tim. I thought about sending my apten ported blower to Brain but I dont know if it would yeild that much more power for what it cost so I decided against it.
BTW what type of hose did you use for the ducting to your RAI?
BTW what type of hose did you use for the ducting to your RAI?
Last edited by mustangman03; 01-13-2011 at 09:42 PM.
#20